NC 2-Axis Laxman Cylindrical Grinding Machine

Excellence is our Passion

MODEL CLM4 Cylindrical

Our cylindrical grinders are very popular for their sturdy construction, efficiency and precision engineering. We procure the best quality raw materials to manufacture this grinder.


Model NC CLM-2 NC CLM-3 NC CLM-4
Max. distance between Centres 450 mm. 600 mm. 1000 mm.
Max. Grinding length 450 mm. 600 mm. 1000 mm.
Height of Centre 150/175/200 mm. 150/175/200 mm. 150/175/200 mm.
Grinding Wheel
Max. Grinding wheel Size OD X Width X ID 350x40x127 / 400x40x127 350x40x127 / 400x40x127 350x40x127 / 400x40x127
Linier Velocity 33 M/s 33 M/s 33 M/s
Work Head
Swivel Range 45° 45° 45°
Spindle Morse Taper MT3/MT4 MT3/MT4 MT3/MT4
No. of Speed Variable Variable Variable
Work Table Swivel Angle -2 to 7 Degree -2 to 7 Degree -2 to 7 Degree
Tail stock Taper Hole MT3/MT4 MT3/MT4 MT3/MT4
X-Axis Rapid Feed Rate 6000 mm/Min 6000 mm/Min 6000 mm/Min
X-Axis min. input Increment 0.001 mm 0.001 mm 0.001 mm
Z-Axis Rapid Feed Rate 6000 mm/Min 6000 mm/Min 6000 mm/Min
Z-Axis min. input Increment 0.001 mm 0.001 mm 0.001 mm
Drive Motor
GW Head Spindle 3Hp/2.2 KW 3Hp/2.2 KW 3Hp/2.2 KW
Work Head Spindle 1Hp/0.75 KW 1Hp/0.75 KW 1Hp/0.75 KW
X-Axis Servo Motor 1.5KW 1.5KW 1.5KW
Z-Axis Servo Motor 1.5KW 1.5KW 1.5KW
Lubrication Motor 0.25Hp/0.18KW 0.25Hp/0.18KW 0.25Hp/0.18KW
Coolant Pump 0.15Hp/0.1KW 0.15Hp/0.1KW 0.15Hp/0.1KW
Total Weight Net Weight 1500kG 1950KG 2300KG
Standard Accessories Grinding wheel Motor, Work head motor, X & Z Axis Servo Motor, Lubrication motor, Electricals switchgear HMI, PLC, MPG, Control panel, Push button with electric fittings, Grinding wheel, Dressing attachment, Dead centres, Coolant pump, Magnetic Filter with tank and fittings, Semi covered splash guard etc.
Optional/ Extra Accessories
Extra Wheel flange
Wheel balancing stand with arbour/ portable wheel balancing instrument/Automatic grinding wheel balancer on spindle
Internal Grinding Attachment and ID spindle
Three Point and Two Point steady rest
variable speed Control AC drive in Grinding wheel Head with digital read out
Cartridge spindle / Hydrodynamic/ filmatic bearing spindle
Auto In process gauge/ Arm Type In Process gauge & Interrupted surfaces.
Diamond Roller type dressing unit with spindle, Without Diamond Roller
Hydraulic Tailstock
Machine lamp
Chuck Plate/ 3Jaw chuck/4 Jaw Chuck/ Hy Chuck
Magnetic Separate / Paper band filter/ Magnetic Separate with Paper band filter
Auto Loading & UN-loading System
Wood Box Packing


  • Body The base is made of close-grained cast iron and is well ribbed. It is made particularly heavy to prevent vibration and distortion the guide ways - one side flat End the other V type are precision hand scrapped to match the corresponding surfaces of the table slides. Longitudinal travel of the table is by Ball screw and servo motor arrangement and automatic and manual Control by PLC, HMI and MPG.
  • NC Cylindrical grinding machine have Twin support ground ball screw fitting for Both Axis so it can give hi Accuracy in plunge and travel grinding process Also get Great reapit accuracy in Grinding process
  • Both Slide way of table advance Lubrication system, this provide various features , such as extremely smooth movement, Added feed accuracy and superior grinding accuracy.
  • WHEELHEAD The rigid wheel head spindle is made of EN 24 or 353 steel hardened and ground. It runs is adjustable type bush bearing.(Optional available hi precision bearing pair fitted cartridge spindle) The spindle is tapered (5o) at the front to receive the wheel flange. the bearing surfaces.
  • WORKHEAD The work head spindle is made of nickel chrome steel EN-24 or 353 hardened & ground. runs in gun metal bush bearings or in Angular contact bearing. The drive to the work head spindle, which has MT-3/MT4 is by a 1 step 'V' pulley. The speed obtained through VFD control AC motor. The work head is built for grinding operation both with stationary centre and revolving spindle. oil cups are provided for lubrication.
  • INTERNAL GRINDING ATTACHMENT The spindle of the internal grinding attachment which is suitable for grinding cylindrical and tapered is made of EN-31 and is ground. It runs in preloaded magneto ball bearings-two in the front and two is the rear. The drive to the spindle is by an independent motor through endless nylon flat belt. The hinge-type internal grinding attachment is conveniently located on the wheel head so that is can be easily swing down into position. The standard spindle quill admits grinding wheel of given diameters up to a width of 9 mm.
  • TAILSTOCK The spring loaded , Oil bath, Heavy duty tailstock spindle has MT-3/MT-4.(hydraulic Operated Tailstock available with optional) The tailstock travels smoothly all along the length of table right up to the work head. The clamping of the tailstock is by means of a nut & bolts.
  • DRESSING UNIT The dressing unit consists of a single point fixed dresser which is capable of profile dressing as well as straight dressing. Diamond Roller dressing with spindle for wear less and accurate dressing available as Optional accessories.
  • COOLANT Generous coolant supply is provided with an electrical pump fitted on a separate tank, measuring approximately 24" x 12" x 12" (L.W.H.) and having a capacity of 60 liter water
  • multiple step grinding Possible with NC model
  • In OD Grinding Travel and plunge both cycle possible with this model
  • ID Grinding Cycle Track and Travel available with this machine
  • Auto dressing and Auto compensate with single switch
  • Half grinding cycle dressing, Auto dressing compensate and dressing alarm indication available.
  • MPG have 1, 10,100 Micron input increment possible for Easy setting and offset purpose
  • Mounted Electrical Control Panel easy maintenance, operating and handling

Key Features NC Cylindrical Grinding Machine

  • Heavy Ribbed and Optimally analyzed structure for best thermal and vibration damping.
  • Seasoning Processed structure for lifelong Accuracy.
  • Precisely Hand scrapped Guide ways with Anti Friction TURCITE-B Coating for best Results.
  • Heavy Duty Work head and Tail Stock.
  • Axis Movement through ground preloaded Ball screws.
  • Cartridge type Super Precision Spindles and Hydrostatic Bush bearing Both model available .
  • Complete Protection of guide ways from coolant and grinding dust.
  • Custom Screen for easy operation and programming.
  • With Inbuilt Rough , Semi finish , finish grinding cycles.
  • Centralized Auto Lubrication System.
  • Grinding package of Mitsubishi or delta make.

For any technical or commercial query or inquiry


Our Brochure

Whats App