Cylindrical Grinder
Our cylindrical grinders are very popular for their sturdy construction, efficiency and precision engineering. We procure the best quality raw materials to manufacture this grinder.
Specifications
|
|
C.L.M.-1
|
C.L.M.-2
|
C.L.M.-3
|
C.L.M.-4
|
|
General
|
Max. distance between Centres
|
300 mm.
|
450 mm.
|
600 mm.
|
1000 mm.
|
|
Max. Grinding length
|
300 mm.
|
450 mm.
|
600 mm.
|
1000 mm.
|
|
Height of Centre
|
115 mm.
|
115 mm.
|
115 mm.
|
170 mm.
|
|
Wheel Head
|
Max. Grinding wheel dia.
|
300 mm.
|
350 mm.
|
350 mm.
|
500 mm.
|
|
Max. Width of wheel
|
25 mm.
|
25 mm.
|
25 mm.
|
25 mm.
|
|
Bore of Grinding wheel
|
127 mm.
|
127 mm.
|
127 mm.
|
203 mm.
|
|
R.P.M. of Grinding wheel spindle
|
2000
|
1900
|
1900
|
1100
|
|
H.P. of wheel
|
2 HP
|
2 HP
|
2 HP
|
2 HP
|
|
Work Head
|
Swivel Range
|
45o
|
45o
|
45o
|
45o
|
|
Spindle Morse Taper
|
M.T.3
|
M.T.3
|
M.T.3
|
M.T.3
|
|
No. of Speed
|
3
|
3
|
3
|
4
|
|
H.P. of Motor
|
0.5 HP
|
0.5 HP
|
0.5 HP
|
0.5 HP
|
|
Total weight
|
1000 Kg
|
1200 Kg
|
1500 Kg
|
1800 Kg
|
BASE
The base is made of close-grainde cast iron and is well ribbed. It is made Particularly heavy to prevent vibration and distortion the guideways - one side flatand the other V type are precision hand scrapped to match the corresponding surfaces of the table slides. Longitudinal hand travel of the table is by rack and pinion arrangement and automatic travel by hydraulic. The change overfrom manual lubrication of the longtudinal and cross side ways, two pil pockets and groves are provided, one at eachend.
HYDRAULIC SYSTEM
This consists of a general pump, oil tank, piping, etc. All conveniently housed in the base. The hydraulic is made of graded cast Iron and is honed.
WHEELHEAD
The rigid wheel head spindle is made of EN 24 or 353 steel hardened and ground. It runs is adjustable type bush bearing. The drive to the wheelhead transverse is cross direction is on precision handscrped 'V' and flat gideways. The spindle is tapered (5o) at the front to receive the wheel flange. Oil holes are provided for lubrication of the bearing surfaces.
WORKHEAD
The workhead spindle is made of nickel chrome steel EN-24 or 353 hardened & ground. runs in gun metal bush bearings or in Angular contact bearing. The drive to the work head spindle, which has MT-3 is by a 3 step 'V' pulley. The speed obtained through this pulley can be reduced by another bigger size pulley provided in the workhead housing. The workhead is built for grinding operation bothwith stationary centre and revolving and revolving spindle. oil cups are provided for lubrication.
INTERNAL GRINDING ATTACHMENT
The spindleof the internal grinding attachment which is suitable for grinding cylindrical and tappered is made of EN-31 and is ground. It runs in preloaded magneto ball bearings-two in the front and two is the rear. the drive to the spindle is by an independent motor through endless nylonflat belt. The hingle-type internal grinding attachment is conveniently located on the wheel head so that is can be easily swing down into position. The standard spindle quil admits grinding wheel of given diameters upto a width of 9 mm.
TAILSTOCK
The spring loaded tailstock spindle has MT-3. The tailstock travels smoothly all along the length of table right upto theworkhead. The clamping of the tailstock is by means of a nut & bolts.
COOLANT
Generous coolant supply is provided with an electrical pump fitted on a separate tank, measuring approximately 15" x 15" x 12" (L.W.H.) and having a capacity of 36 liter water.
ELECRICALS
The machine is supplied with electricals suitable for the supply of 400 / 440 V.A.C. 50 cycles. Electric motors are of reputed make. The machine can be ON and OFF by Push button uindividual controls and general stop.
STANDARD EQUIPMENT
Electricals, control panel, grinding wheel, dressing attachment, deed centres, electrical-coolent pump with tank and fittings.
EXTRA ACCESSORIES
Internal grinding attachment with motor, Micro feeding attachment, Mechanically automatic cross slide feed attachment, three point steady rest, two point steady rest, wheel balancing arbour, wheel dressing attachment, wheel balanding attachment, additional wheel flange, chuck flange, revolving centre, MT-3, 3 jaw true chucks, dead Center granding attachment, internal dresser stand ratious dresser, wheel angle dresser, Magnetic collant filter, Paper band cum magnetic coolant filter.
|
